Chhattisgarh Monsoon mein Solar Panels ki Generation aur Safety Guide
Barish ke dino mein solar panels kitni bijli banate hain, lightning arrestor earthing ka importance aur Durg-Bhilai ke chhaton par waterproofing maintenance.
Seedha jawab
Monsoon aur cloudy weather mein bhi solar panels bijli banate hain, kyunki modern mono-PERC aur bifacial cells diffuse sunlight (badal ke peeche se aane wali roshni) ko absorb karte hain. Durg-Bhilai mein heavy monsoon ke dauran normal generation ka lagbhag 30% se 50% output milta rehta hai. Heavy rains natural cleaning ka kaam karti hain jisse panels par jami dhool saaf ho jaati hai.
Chhattisgarh mein monsoon ke dauran sabse critical factor generation nahi, balki electrical safety aur structural integrity hota hai. Aandhi-toofan aur aakashia bijli (thunderstorms) se safety ensure karna zaroori hai.
Barish ke mausam mein 4 zaroori safety checks
| Safety Element | Required Standard | Purpose |
|---|---|---|
| Lightning Arrestor (LA) | Copper/GI coated arrestor mast at top | Aakashia bijli ko safely ground karna |
| Dual Chemical Earthing | Dedicated copper earth pits (< 5 Ohms) | Inverter aur structure shock prevention |
| Cable Management | UV-resistant conduits clamped off floor | Pani bharne par wire short-circuit rokna |
| Civil Waterproofing | Rubber gasket pads + civil flashing | Chhat ke slab mein pani leakage prevent karna |
Monsoon mein generation kam hone par grid balance
On-grid solar system ka sabse bada fayda ye hai ki aapka ghar continuous state electricity grid (CSPDCL) se connected rehta hai. Jis din badal zyada honge ya generation 40% par hogi, bachi hui required power automatically grid se supply hoti hai bina kisi power cut ke.
Garmiyon aur thand ke mahino mein jo excess units aapke net meter dwara grid mein export huye hote hain, unka credit monsoon ke mahino mein bill offset karne ke kaam aata hai.
Aksar poochhe jaane waale sawaal
- Kya barish mein panels ko physically touch karna safe hai?
- Jab barsaat ho rahi ho ya chhat geeli ho, panels aur inverter ko touch na karein. System mein high DC voltage chalta hai. Kisi bhi maintenance se pehle ACDB/DCDB isolator switch band karna chahiye.
- Toofan ke dauran structure udd toh nahi jayega?
- Proper engineered mounting structures hot-dip galvanized steel ke hote hain jo 150 km/h wind velocity test pass karte hain. Hum structure ko civil roof slab par heavy anchor fasteners se mount karte hain.
Durg Bhilai Solar har installation ke sath high-grade dual chemical earthing aur lightning protection standards follow karta hai. Apni chhat ki monsoon readiness check karwane ke liye humari team se baat karein.